2016与1998年春季北大西洋海表温度异常的差异及成因     

薛文璟  余锦华  陈林 《热带海洋学报》2020,39(3):19-30

利用再分析资料以及混合层海温诊断方程, 研究1997—1998与2015—2016年超级厄尔尼诺次年北大西洋海表温度异常(sea surface temperature anomalies, SSTA)的差异及成因。结果显示, 北大西洋SSTA在1998年春季呈明显正负正三极型式分布, 而在2016年呈弱的负正负型态。诊断热带北大西洋SSTA的影响因素表明, 1998年春季暖SSTA除了之前研究强调的海洋表面向大气的潜热输送异常减少, 以及吸收太阳辐射的增加外, 海洋动力过程即Ekman纬向漂流也起着重要的作用。热力过程与厄尔尼诺峰值后出现的北大西洋涛动(North Atlantic Oscillation, NAO)负位相有关, 其可引起亚速尔高压减弱, 产生西南风异常, 通过风-蒸发-海表温度(sea surface temperature, SST)反馈机制使热带北大西洋蒸发减弱, 海表增暖, 沃克环流下沉支的东移对这一增暖也有贡献。与1997—1998厄尔尼诺事件不同, 2015—2016厄尔尼诺事件没有强迫出负位相NAO, 而是出现弱NAO正位相, 热带北大西洋为弱的东风异常, 使海表发生一定的冷却, 形成2016春季北大西洋SSTA与1998年的明显差异。  相似文献   

复杂载荷作用下立管触地段损伤管道的动力响应     

代云云  周晶  李志刚 《中国海洋大学学报(自然科学版)》2020,(1):145-153

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。  相似文献   

Robust adaptive unscented Kalman filter for bearings-only tracking in three dimensional case     

《Applied Ocean Research》2019

This paper proposes an improved version of Unscented Kalman Filter (UKF), namely Robust Adaptive UKF (RAUKF), with a special focus on Bearings-Only Target Tracking for three-dimensional case (3DBOT). The automatic tuning of the noise covariance matrices and the robust estimation of the target states form a critical point for the performance of the Kalman-type filtering algorithms, especially in the variable environmental conditions exposed in underwater. The key idea of the proposed filter is to combine robust aspects of UKF and adaption of the process and measurement noise covariance matrices with low computational complexity. The main contribution of this paper is to adjust these matrices by means of the steepest descent algorithm, and the H_∞ technique is embedded to achieve superior performance in terms of accuracy and robustness against initial conditions and model uncertainties. Different experiments are performed to evaluate the performance of the proposed algorithm in the 3DBOT problem with a single moving observer. Simulations demonstrate that the proposed filter produce more accurate results with satisfactory computational burden in comparison with other methods.  相似文献   

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data     

Xiaoyu Sun  Xia Peng  Yiran Chen  Yu Liu 《International Journal of Digital Earth》2019,12(6):661-678

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.  相似文献   

驯化水温及温升速率对三门湾三种虾蟹类热耐受性的影响   总被引：1，自引：1，他引：0  

田洪林  曹亮  刘金虎  窦硕增 《海洋科学》2018,42(4):43-52

作者采用动态实验法与静态实验法相结合的方法,研究了三门湾脊尾白虾(Exopalaemon carinicauda)、口虾蛄(Oratosquilla oratoria)和日本(Charybdis japonica)在不同季节的基础水温即驯化水温(8~29℃)和温升速率(0.5~15.0℃/h)下的热耐受能力。结果表明,驯化水温和温升速率对各实验动物的热耐受性均有显著影响。实验动物的热耐受性与驯化水温总体上呈显著正相关,而温升速率对热耐受性的影响具有物种特异性,并受驯化水温制约;在不同驯化水温下,各实验动物的热耐受性随温升速率增大呈不同变化趋势。各实验动物的24 h高起始致死温度受驯化水温的影响显著,随着驯化水温从8℃升高到29℃,脊尾白虾、日本和口虾蛄的24hUILT50分别从24.2、34.6、24.9℃显著增大到35.3、37.4和34.4℃。结合3种实验动物的最大临界温度分析,它们的热耐受能力依次为:日本脊尾白虾口虾蛄。研究结果可为探究三门湾水域潜在的热污染状况及其生态环境效应提供科学依据。  相似文献   

北太平洋副热带模态水盐度的年代际变化     

胡睿坤  边志刚  刘子洲  刘聪  翟方国  顾艳镇 《中国海洋大学学报(自然科学版)》2020,(2):9-21

副热带模态水(Subtropical Mode Water;STMW)在气候变化中起着重要作用。本文利用全球高分辨率数值模拟结果,研究了北太平洋STMW核心层盐度(Core Layer Salinity;CLS)的年代际变化及其物理机制。结果表明,CLS存在显著的年代际变化,其空间分布则与背景流场分布特征有关。侵蚀区CLS滞后生成区CLS约1~2年,这主要是海流平流输运引起的。生成区内,STMW的季节循环一般可分为生成期(12-4月)、隔离期(5-6月)和侵蚀期(7-11月),生成期混合层盐度(Mixed Layer Salinity;MLS)决定着隔离期和侵蚀期的CLS,而MLS年代际变化则主要由同太平洋年代际涛动存在负相关性的海表面淡水通量的变化引起。  相似文献   

基于PSR-WSVM模型的边坡位移预测     

李建新  刘小生  肖钢  周文  刘仁志 《大地测量与地球动力学》2020,40(6):577-580

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。  相似文献   

边带分离型超导SIS接收机本振耦合噪声研究          下载免费PDF全文

李振强  张旭国  李积斌  左营喜  徐烨  张海龙  金风娟 《天文学报》2020,61(2):18-84

超导SIS (Superconductor-Insulator-Superconductor)接收机因极低的接收机噪声温度成为毫米波和亚毫米波段射电天文观测的首选.本振系统耦合噪声也是接收机噪声的一部分,在多年的天文观测中,发现本振耦合噪声无法完全忽略,对天文观测的灵敏度有一定影响.采用两个不同种类的信号发生器作为本振系统初级信号源,测试了超导SIS接收机的噪声温度,发现信号发生器输出的基底噪声能够耦合到接收机内部,从而增加接收机噪声强度.分析研究了本振系统热噪声和信号发生器基底噪声对接收机噪声的影响.通过在信号发生器输入端加入窄带滤波器滤除其基底噪声,消除了信号发生器基底噪声引入的接收机噪声,降低了接收机的整体噪声,提高了望远镜的灵敏度.  相似文献   

Burial and exhumation of the Hoh Xil Basin,northern Tibetan Plateau: Constraints from detrital (U-Th)/He ages     

Jin-Gen Dai  Matthew Fox  David L. Shuster  Jeremy Hourigan  Xu Han  Ya-Lin Li  Cheng-Shan Wang 《Basin Research》2020,32(5):894-915

The uplift and associated exhumation of the Tibetan Plateau has been widely considered a key control of Cenozoic global cooling. The south-central parts of this plateau experienced rapid exhumation during the Cretaceous–Palaeocene periods. When and how the northern part was exhumed, however, remains controversial. The Hoh Xil Basin (HXB) is the largest late Cretaceous–Cenozoic sedimentary basin in the northern part, and it preserves the archives of the exhumation history. We present detrital apatite and zircon (U-Th)/He data from late Cretaceous–Cenozoic sedimentary rocks of the western and eastern HXB. These data, combined with regional geological constraints and interpreted with inverse and forward model of sediment deposition and burial reheating, suggest that the occurrence of ca. 4–2.7 km and ca. 4–2.3 km of vertical exhumation initiated at ca. 30–25 Ma and 40–35 Ma in the eastern and western HXB respectively. The initial differential exhumation of the eastern HXB and the western HXB might be controlled by the oblique subduction of the Qaidam block beneath the HXB. The initial exhumation timing in the northern Tibetan Plateau is younger than that in the south-central parts. This reveals an episodic exhumation of the Tibetan Plateau compared to models of synchronous Miocene exhumation of the entire plateau and the early Eocene exhumation of the northern Tibetan Plateau shortly after the India–Asia collision. One possible mechanism to account for outward growth is crustal shortening. A simple model of uplift and exhumation would predict a maximum of 0.8 km of surface uplift after upper crustal shortening during 30–27 Ma, which is insufficient to explain the high elevations currently observed. One way to increase elevation without changing exhumation rates and to decouple uplift from upper crustal shortening is through the combined effects of continental subduction, mantle lithosphere removal and magmatic inflation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献